CONTROL CHARACTERISTICS
Back-lit LCD display
Predisposition for connection to industrial label printer
USB port
RJ45 network card
Execution of single cuts
Memorization of 99 profile compensations with automatic calculation of the size for angle cuts
Memorization of 20 cutting lists (each with 50 lines) via keyboard
Memorization of 10 cutting lists (each with 100 lines) via cable from external PC through RS232 board
MACHINE CHARACTERISTICS
Measurement of moving cutting head position via direct measuring system with magnetic tape
2 carbide-tipped blades
Full guard for cutting zone, pneumatically operated
Pair of pneumatic horizontal and vertical clamps with “low pressure” device
Profile support roller conveyor
Lubrication system, spray-mist lubrication with oil and water emulsion or minimum quantity oil lubrication (depending on version)
Cutting angles with blade Ø 450 and 500 mm from 22°30’ (external) to 90°
Manual profile support
Predisposition for automatic start of swarf exhauster MG
Pair of standard counterblocks
Metric scale
Cutting capacity 4/5/6 m depending on model
Blade motor power rating (kW)
Description
1- control
The user-friendly control panel installed on the various models, runs on bearings and allows correct positioning of the moving cutting heads according to cutting specifications. The work cycle is optimized through creation of the cutting lists thus reducing scrap as well as workpiece loading/unloading times.
2- tilting of mocing cutting heads
The heads rotation around the horizontal axis happens through pneumatic cylinders and the obtainable angles, vary from 90° up to 22°30’ external; the average angles are obtained through suitable, manually adjustable, stops. The mobile units are equipped with protections with pneumatic descent of the working area.
3- Digital readout for intermediate angles ( Optional )
When there is pneumatic tilting of the moving cutting heads, the intermediate angle readout allows exact identification of the tilting of the cutting head, thereby ensuring accuracy of the cut profiles. This device, which is specially useful in making cuts at intermediate angles, allows the operator to identify the required angular setting quickly and accurately.
4- Label printer ( Optional )
The industrial label printer allows identification of each cut profile with the profile I.D. data originating from the cutting list. In addition, the printing of bar codes permits easy identification of the actual profile, which is particularly useful for subsequent machining phases on the machining centers or on assisted assembly lines.
5- Intermediat support ( Optional )
The pneumatic intermediate support proves highly useful when cutting light profiles with considerable lengths. In such case the pneumatic support automatically seeks to create the ideal condition to support the
profile. This accessory is available for all lengths, but it is especially recommended on machines with cutting capacity of 5 and 6 metres.
